Home >> September 2018 Edition >> The Aerospace Corporation: An Analysis—Launching U.S. government payloads on foreign soil
The Aerospace Corporation: An Analysis—Launching U.S. government payloads on foreign soil
By Barbara M. Braun and Eleni M. Sims

 

The emergence of new, venture-class launch providers for small satellites has led to questions about the suitability of these launch providers for U.S. government missions.

In particular, many of these emerging launch providers, including Rocket Lab USA and VOX Space, are subsidiaries of foreign companies or maintain launch sites in foreign countries. As a set of policies and laws exist that require U.S. government satellites to be launched on U.S. launch providers, many U.S. government agencies are investigating the legal and policy implications of launching with these providers.

Several U.S. law and policy statements require launch vehicles for U.S. Government satellites to be manufactured in the United States. Title 51 of U.S. Code (National and Commercial Space Programs)1 requires “the Federal Government [to] acquire space transportation services from United States commercial providers.” Title 51 goes on to define a United States commercial provider as one that is “more than 50 percent owned by United States nationals.”

Additionally, Title 41 of U.S. Code, Sections 8301-8305 (the “Buy American Act”)2 stipulates that for an item to be considered manufactured in the United States, at least 50 percent of all its components, by cost, must be manufactured in the U.S.

In addition to the laws documented in U.S. Code, multiple policies exist that dictate which launch vehicles can be used by U.S. government programs. The National Space Transportation Policy (NSTP) states as a goal, “United States Government payloads shall be launched on vehicles manufactured in the United States unless an exemption is coordinated.”

Department of Defense Instruction (DODI) 3100.12, “Space Support,” states that “DoD payloads shall be launched on U.S. manufactured launch vehicles” and that “U.S. commercial space launch services shall be utilized to the fullest extent feasible…in accordance with [the National Space Transportation Policy] and [the Commercial Space Act of 1988].”

These laws and policy statements establish a two-part test to determine if a launch vehicle is manufactured in the United States and thus allowed to launch U.S. government satellites. The two tests are:

1. Is the launch vehicle company more than 50 percent owned by United States nationals? (required by Title 51 of U.S. Code and DODI 3100.12)

2. Are 50 percent or more of the launch vehicle components, by cost, manufactured in the United States? (required by Title 41 of U.S. Code and the National Space Transportation Policy)



Most government launch agreements are also subject to the Federal Acquisition Regulation. The Federal Acquisition Regulation states that the place of manufacture of an item is “predominantly in the U.S. … if the total anticipated price of offered end products manufactured in the United States exceeds the total anticipated price of offered end products manufactured outside the United States.”

This is similar to the second test listed above, but Part 52.225-18 of the Federal Acquisition Regulation also defines the “place of manufacture” as “the place where an end product is assembled out of components.” Although U.S. government launch agreements exist that are governed by transaction authorities other than the Federal Acquisition Regulation, they sometimes use similar language.

This language appears to establish a third test to determine if a launch vehicle is manufactured in the United States; namely, is the end product assembled out of components in the United States?

However, most argue that this third test does not apply to launch vehicles because the government typically buys a launch service (the delivery to orbit), not the launch vehicle itself. In these cases, the government does not take possession of the launch vehicle, and, therefore, the launch vehicle is not an “end product,” as defined by the Federal Acquisition Regulation.

Also, a launch vehicle can often only be assembled into its launch configuration at the launch site. It is not clear if the Federal Acquisition Regulation considers final integration with the payload an “assembly out of components” for the purposes of determining if the launch vehicle is manufactured in the United States. If so, it could have the unintended consequence of precluding all U.S. government launches from outside the United States.

Recently, leadership from NASA and the DoD have issued determination letters indicating that Rocket Lab USA, which meets the first two tests but which launches out of New Zealand, is considered a United States commercial launch provider for the purposes of launching U.S. government experimental payloads.



Given that determination, NASA and the U.S. Air Force are planning launches of experimental small satellites on Rocket Lab USA Electron vehicles. Both determination letters note that this is an “interim position,” however, and not “dispositive of future decisions.”

As venture class vehicles are proliferating, and the U.S. Government is looking to expand launch partnerships across the globe, clarifying the regulatory landscape surrounding launches from foreign soil will be necessary. The U.S. government will need to balance policy decisions that protect the domestic launch industry and its U.S. government payloads, while assuring access to space by fostering competition and opening doors to more launch providers and sites.
www.aerospace.org/policy

References

1 Title 51, United States Code, National and Commercial Space Programs, December 18, 2010, http://uscode.house.gov/view.xhtml?path=/prelim@title51&edition=prelim.
2 Title 41, United States Code, Public Contracts, January 4, 2011, http://uscode.house.gov/view.xhtml?path=/prelim@title41&edition=prelim.

Barbara M. Braun joined The Aerospace Corporation in 2000 and has supported multiple small satellite and rideshare missions for the Department of Defense Space Test Program, the Operationally Responsive Space Office, and NASA. She served in the U.S. Air Force for 21 years, on active duty and in the reserves, where she worked on space safety policy for the U.S. Air Force Safety Center.

Eleni M. “Sam” Sims is a project engineer in the Space Innovation Directorate. She provides technical support to the Air Force’s Advanced Systems and Development Directorate — specifically, the DoD Space Test Program — by architecting advanced science and technology missions. She is the lead technical support for three satellites on the STP-2 mission, which is scheduled to launch in 2018.

About the Center for Space Policy and Strategy
The Center for Space Policy and Strategy is dedicated to shaping the future by providing nonpartisan research and strategic analysis to decision makers. The Center is part of The Aerospace Corporation, a nonprofit organization that advises the government on complex space enterprise and systems engineering problems.